• j8-infinix1

    4G Mobile Phone Configuration Simple Procedure

     

    Dear customers,
    Please follow the nine easy steps to help you configure your APN (Access Point Name) on your mobile phone in order to enable your registration on InterC Network

    4G Mobile Handset:

    Step 1: Pre-requisite:

    • Ensure InterC Network service is available
    • Ensure the SIM is provisioned on InterC Network
    • Ensure the mobile phone is 4G enabled

    Step 2: Locate the Sim compartment and correctly insert the SIM and power on the Mobile.

    Step 3: Go to Settings and click on the icon as indicated below:

    mob1

    Step 4: In the Setting, click on more network as indicated below:

    mob2

    Step 5: Then click on Cellular networks as indicated below:

    mob3

    Step 6: The Cellular network settings is illustrated below:

    mob4

    Step 7: In the Cellular Network settings open Access Point Names (APN) Click the + sign and configure InterC Network APN i.e lte.InterCNetwork.com as shown in the snapshot below. Ensure you configure the APN correctly as illustrated otherwise the mobile cannot register on InterC Network. You are also required to save (using the dotted lines) after entering the APN.

    mob5

    Step 8: In Step 6 above set the preferred Network to 4G and then click on Network operators and search for available networks and register on InterC 4G or 62122 from the list of the available Networks and you will receive a message that you are successfully registered on the network.

    Step 9: Check the phone home page to verify that you are successfully registered.

  • mifi-router-img

    Setting up Huawei Routers/Mifi

     

    SIMPLE PROCEDURE FOR CUSTOMISING MIFI/ ROUTER

    Dear customers,
    Please follow the five easy steps below to help you configure your APN (Access Point Name) on your mifi or router in order to be able to register on InterC Network

    4G MIFI/Router:

    Step 1: Pre-requisite:

    • Ensure InterCNetwork service is available
    • Ensure the SIM is provisioned on InterCNetwork
    • Ensure the mobile phone is 4G enabled

    Step 2:

    Connect the device to your laptop via WIFI or desktop using the device USB Cable. Open your internet explorer type the generic Huawei device IP address ie 192.168.8.1 (http://192.168.8.1/html/home.html). Thus
    The following window will be shown;

     

    mifi1

     

    Step 3: Click on settings to configure the APN, another window will popup requesting you for user name and password. Username: Admin Password: Admin.

    mifi2

    Click Later when ask to change the password, see below:

    mifi4

    Step 4: On the Configure Profile settings window click on new profile to configure the Profile name and the APN as shown below; Click next to go to the Configure WLAN settings.

    mifi5

    Step 5: You can customise Device name WIFI Key (SSID and WPA pre-shared key) on the below window and then click finish.

    mifi6

    Note: After clicking finish the device will be disconnected. Reconnect to verify your changes.

  • alcatel-mifi

    Simple Procedure for Customising Alcatel Mifi

     

    Dear customers,

    Please follow the nine easy steps to help you configure your APN (Access Point Name) on your Alcatel mifi in order to enable your registration on InterC Network.

    Step 1: Pre-requisite:

    • Ensure InterC Network service is available
    • Ensure the SIM is provisioned on InterC Network
    • Ensure it is Alcatel MIFI 4G device

    Step 2: Connect the device to your laptop via WIFI or desktop using the device USB Cable. Open your internet browser and type the generic Alcatel device IP address ie 192.168.1.1 (http://192.168.1.1/html/home.html).

    Thus:

    alc1

    Step 3: Click on settings and enter the password on the popup window below and click; the password is admin in lower case.

    alc2

    The below settings menu will be displayed;

    alc3

    Step 4: Click on Profile Management to configure InterC APN i.e lte.InterCNetwork.com as shown below;

    alc4

    Step 5: click on New and configure the profile name, Dial number and APN fields

    alc5

    Profile name: InterC Network

    Dial number: *99#

    APN: lte.InterCNetwork.com

    See the illustration in the below snapshot:

    alc6

    Step 6: Click on the save tab to save your entries and then click ok.

    alc7

    Step 7: Click the profile Management tab and set InterC Network profile name as default as illustrated below:

    alc8

    alc9

    Step 8: Still on the setting menu click on the WIFI setting to change the device name MV40V_ to InterCNetwork_.

    alc10

    alc11

    Step 9: On the same page above scroll down and click apply to effect the name change.

    alc12

    Once you click apply a warning popup window will appear, once you click ok success prompt will be displayed.

    alc13

    alc14

    Reconnect to the device to confirm the changes made. Try to go to any website to confirm you can browse with device.

    alc15